Modify Selection
- Mine locations, excavations, and structures:
- Sumps
- or
- Slopes
- or
- Material piles
- or
- Mine surface
- or
- Laboratories
- or
- Stoppings
- or
- Caves
- or
- Faces
- or
- Offices
- or
- Boreholes
- or
- Stopes
- or
- Highwalls
- or
- Underground
- or
- Tunnels
- or
- Crosscuts
- or
- Pillars
- or
- Yield pillars
- or
- Barrier pillars
- or
- Chain pillars
- or
- Web pillars
- or
- Returns
- or
- Escapeways
- or
- Gobs
- or
- Airways
- or
- Bulkheads
- or
- Intersections
- or
- Longwall panels
- or
- Headgates
- or
- Recovery rooms
- or
- Tailgates
- or
- Entries
- or
- Bleeder entries
- or
- Intake entries
- or
- Panel entries
- or
- Belt entries
- or
- Drifts
- or
- Ore passes
- or
- Ore chutes
- or
- Wells
- or
- Drainage wells
- or
- Water wells
- or
- Storage structures
- or
- Hoppers
- or
- Silos
- or
- Trenches
- or
- Processing plants
- or
- Benches
- or
- Manholes
- or
- Shafts
- or
- Transformer stations
Home Links
Results 281 - 290 of 348
-
1/1/1995 - Reports of InvestigationsA hydrologic-subsidence investigation was performed to evaluate the effects of longwall mining on the local groundwater regime through field monitoring and numerical modeling.
-
1/1/1995 - Reports of InvestigationsDisplacement and stress changes in cemented backfill and ore pillars at the Buick Mine, near Boss, MO, were monitored by engineers from the U.S. Bureau of Mines and The Doe Run Co., St Louis, MO. Objectives of this research were to evaluate the effect ...
-
1/1/1995 - Reports of InvestigationsThis U.S. Bureau of Mines study examined spontaneous heating episodes in coal mine pillars in an active underground coal mine. The objective of this study was to discover if the location of future events of pillar spontaneous heating could be inferred ...
-
1/1/1995 - Conference papersIn addition to developing various types of cool-interface detection systems, the US Bureau of Mines is actively involved in developing a coal rib-thickness monitoring system for highwall mining applications. One particular system to detect the coal-air ...
-
1/1/1995 - Reports of InvestigationsSubsidence data gathered by the U.S. Bureau of Mines over a series of longwall panels in the Pittsburgh Coalbed were studied to obtain insight as to the role of time in the subsidence process. These results were then compared to data from three other si...
-
5/1/1994 - Technology NewsThe underground stope leaching mining system involves applying leach solutions to mineralized rock that has been fragmented by blasting ore in place, or by backfilling empty stopes.
-
3/1/1994 - Technology NewsThe USBM's current approach to air splitting consists of using a polyester mesh partition to overcome the visibility problems of a solid barrier.
-
1/1/1994 - NIOSH/USBM numbered publicationsA computer program called Analysis of Retreat Mining Pillar Stability (ARMPS) is field tested and refined in order to estimate abutment pressures developed during pillaring. It can be successfully employed to predict pillar line stability.
-
1/1/1993 - Reports of InvestigationsThis report investigates the removal of gate road chain pillars in conjunction with longwall retreat mining. The objective was to determine how the pillars, supplemental support, and entries were affected by the longwall abutment pressure.
-
1/1/1993 - Reports of InvestigationsThis report presents results of a U.S. Bureau of Mines study of longwall gob material. The objective of this work was to determine material stiffness properties of the gob for use in numerical models or rock mass response to longwall mining.
Home Links
Content source: National Institute for Occupational Safety and Health, Mining Program